User Guide

57
Chapter 7 Network Test
VirtualClass is equipped with a network diagnostic tool for both the
teacher program and the student program to ensure that the classroom
network functions properly.
If the program does not seem to be able to find a network, please run
the VirtualClass network test tool from
Start->All programs->VirtualClass->Network Test.
Fig.Fig. 4-1a
Step 1 Click the Start button on the top to begin sending test
information from the teacher’s computer to the student’s computer.
Step 2 Click the Start button at the bottom to receive data packets that
have been sent from the teacher’s computer.
Step 3 On the right side, the message window will display the
information about the data received, lost data packets and your network
quality. If no data are received on the student’s computer, please check
your network connection and hardware configuration.
If the problem still persists, please contact FarStone technical support at
[e-mail]
.