User Guide

Chapter 2 Installation
2-1 System Requirements
Teacher Computer
 VirtualClass keypad (optional)
 Microsoft Windows 2000/XP
 450 MHz Pentium III processor (or compatible) or better
 30 MB of free hard disk drive
 24X CD-ROM
 256 MB of RAM
 Microsoft Internet Explorer 4.0 or higher
 10/100Mbps Network Adaptor
 TCP/IP Internet Protocol
 (Optional) Multimedia System: sound adapter, microphone and earphone
Student Computer
 Microsoft Windows 2000/XPr
 433 MHz Celeron processor (or compatible) or better
 20 MB of free hard disk space
 64 MB of RAM
 24X CD-ROM
 10/100Mbps Network Adaptor
 TCP/IP Internet Protocol
 Microsoft Internet Explorer 5.5 or higher
 (Optional) Multimedia system: sound adapter, microphone and earphone.
Notice: When operating on a Windows NT4 system, it is suggested to install VirtualClass under Service Pack 6.
2-2 Installing VirtualClass
2-2.1 Installing VirtualClass
Step 1 Insert the VirtualClass CD into your CD drive. The Setup program should start automatically. If it does
not, run the SETUP.EXE file directly from the CD. Also, if you are installing from a network or hard disk,
double-click 'setup.exe' to launch the Windows Installer program.
Step 2 Carefully read the License Agreement and select 'I agree' if you accept the License conditions. If you
do not accept the terms in this agreement, the setup will be aborted.
Step 3 Select Teacher or Student from the Installation Options screen and click Next, as Fig. 2-2b shows.
10