User Guide

4. Select Finish when the Incremental Backup Point has been successfully created.
4-5 Restoring Your System
Besides restoring via the Administrator’s console, clients can also restore their computer from their
side.
Note: This function is available only when allowed by the Administrator.
Clients can perform a Quick Restore – Restoring to the latest IBP, or restore to any previous backup
point.
4-5.1 Quick Restore
Quick Restore allows you to quickly restore your computer to the state it was in when the most
recent Incremental Backup Point was created.
To perform a Quick Restore
1. Select the Quick Start page and click Quick Restore under I want to perform…, or select the
System Restore page and click Quick Restore.
2. The restoration dialog box will appear and ask you to choose whether to restore Drive C: Only or
the Entire System. Click Next after you have made your selection.
3. Confirm your selection and click Continue.
4. RestoreIT should prompt you that the computer will restart. Click Yes to restart the computer.
5. Your computer will restart and your system will revert back to the most recent backup point.
4-5.2 Restoring to any Incremental Backup Point
To restore an Incremental Backup Point
1. Select System Restore on the main interface, and then Restore to any Incremental Backup
Point.
2. All available records are listed in the box. Choose the Incremental Backup Point that you would
like to restore to and click Restore Now.
- 30 -