User Guide

If this option is chosen, a new IBP will be created on the client computer every time it boots
up.
◊ Create a new Backup Point every (number of) days
Specify a number between 1 and 30 days.
If this option is chosen, a new IBP will be created on the client computer every number of
day(s) that is set. Note: These days are not accumulated. For example, if the setting is for
every two days and the computer does not start up within six days, only one IBP will be
created the next time it is started.
z Create a Backup Point while system is running
◊ Create new Backup Point every (number of) hour(s) since system starts up
Specify a number from 1 to 24.
If this option is chosen, a new IBP will be created every specified number of hour(s) since the
client computer starts up.
3. After you have made your selection, click Apply to activate your settings.
Once a schedule is set for a client, and if the client computer is offline at the scheduled time, the
backup job will be automatically canceled and you will be notified with a dialog box in the RITN
Administrator.
If it is set for a group, if some client computers of this group are offline at the scheduled time, you
will be notified with a dialog box in the RITN Administrator asking if you would like to continue the
backup on the online clients. You can choose to cancel the job or continue to backup the online
computers.
3-5 Restoring Client Computers
RestoreIT Network allows the network administrator to remotely restore specified client computers
from the RITN Administrator. You can perform a manual restoration any time, or set a schedule to
automatically restore at the specified time.
3-5.1 Manually Restoring Client Computer(s)
You can specify an online client or a group of clients to restore their system.
To manually restore Client computer(s):
1. Select an online client or a group from the left panel of the RITN Administrator main interface.
Note:
1. If you choose a group, make sure all clients have logged into the RITN Administrator.
2. If some clients are not online, you will be notified in a later step. You can choose to
continue with the operation but only online computers will be restored.
2. Choose Restore page from the function panel in the upper right of the RITN Administrator main
interface.
All available backup points will be listed in the box (shown below)
- 21 -