User Guide

6. Click Create Now to start the operation.
Once the operation starts, the Client icon in the RITN Administrator interface should change to
working status
and you will see a progressive status bar in the function panel (shown below).
Note: The backing up process runs in background on the client computer. There will be no
interference with the current operation of client computer usage.
However, RestoreIT needs to lock the hard drive during the backup process. If any program is
currently writing to or reading from the hard drive on the client computer, it will not create the
backup. You will be notified if the backup operation failed on any client computer. You can also
check if the operation succeeded from the Historic Record panel.
7. When the IBP is successfully created, click Finish to return.
3-4.2 Automatically Backing up Client Computer
RITN Administrator allows you to set a schedule for a specified client or a group of clients to create a
Backup Point automatically.
Note: If the computer or any computer of the group is not started at the schedule backup time, you
will be notified of the situation and be provided with the choice of continuing or canceling the
operation.
To set backup schedule:
1. Select an online client or a group from the left panel of the RITN Administrator main interface.
2. Choose Schedule page from the function panel in the upper right of the RITN Administrator
main interface. (shown blow).
Here are detailed instructions on to choose these options:
z Create a Backup Point Automatically
◊ Create new Backup Point at every system startup
- 20 -