User Guide

z Right click on the wanted client and select Change to, then the group name you want to move
it to.
3-3.6 Deleting a Client
You can delete a client from client list.
To delete a client:
1. Select the wanted client (highlighted in blue) and choose Groups Æ Delete from the menu bar
of the RITN Administrator main interface, or right click on the client name and select Delete
from the right-click menu.
2. A confirmation dialog box should appear to get your confirmation. Click Yes to delete it from the
RITN Administrator.
3-3.7 Viewing Client Properties
You can view detailed information of a client, including its computer name, IP address, MAC address
and the usage of the RestoreIT Secure Area on the client computer.
To view a Client’s properties:
Select the wanted client (highlighted in blue) and choose Groups Æ Properties from the menu bar
of the RITN Administrator main interface, or right click on the client name and select Properties
from the right-click menu. The Properties dialog box should appear.
Note: You can also change a client name in the Properties dialog box.
3-4 Backing up Client Computers
RestoreIT Network allows the network administrator to remotely back up specified client computers
from the RITN Administrator. A manual backup can be performed at any time. In addition, backup
schedules can be set to automatically back up at specified times.
3-4.1 Manually Creating a Backup for Client Computers
You can specified an online client or a group of clients and create a backup point for them. The
backup file is stored in the RestoreIT Secure Area on the respective local hard drive.
Note: Creating an Incremental Backup Point (IBP) requires a restart of the client computer.
To create an IBP for client computer:
3. Select an online client or a group from the left panel of the RITN Administrator main interface.
Note:
1. If you choose a group, make sure all clients have logged into the RITN Administrator.
2. If some clients are not online, the IBP will not be created for the offline client. When you choose
to restore to this IBP later, these excluded computers cannot be restored.
4. Choose Backup page from the function panel in the upper right of the RITN Administrator main
interface.
5. Enter a name for the backup point in the Incremental Backup Point Name box.
- 19 -