User Guide

Follow the steps below to install RITN Client program on a single client computer:
1. Insert the RestoreIT Network Installation Disc. The Installation Guide (shown below) should start
automatically. If it does not, run autorun.exe directly from the disc.
2. Click RestoreIT Network Client to start the Setup wizard.
3. The RITN Client install screen appears, select Continue to go to the next step.
4. When the License Agreement screen appears, select I Accept to continue.
5. Select an install type, Typical Setup (Recommend) or Customized Setup.
Note: Typical Setup will apply default settings in the following steps to install RITN Client on
the computer. We recommend that normal users choose Typical Setup. Customized Setup
allows manual settings and is recommended for advanced users.
RITN Client will be installed in the path displayed. You can choose anther location to install RITN
Client, or leave it as default.
6. Click Continue and RITN Client will check the disk status to see if there is enough space to
create a RestoreIT Secure Area.
Note: RestoreIT Secure Area is space allocated from the hard drive. It is a hidden, protected
area, used to store the system Incremental Backup Points, and File Backup Records. The
RestoreIT Secure Area cannot be resized after it is created. For better performance, we
recommend that you allocate at least 10% of your total hard drive space for the RestoreIT
Secure Area.
Note: Typical Setup will skip this step
After the system check, RITN Client will give a recommended size for the Secure Area (at least
1000 MB is required), and available space and list the space usage of each partition.
- 12 -