User Guide

Chapter 2
Installation
2-1 System Requirements
Administrator Computer
 Microsoft Windows 2000 (SP4)/XP/2003 Server
 450 MHz Pentium III processor (or compatible) or better
 30 MB of free hard disk drive
 256 MB of RAM
 Microsoft Internet Explorer 5.5 or higher
 10/100Mbps Network Adaptor
 TCP/IP Internet Protocol
Client Computer
 Windows 2000 Pro(SP4)/XP Pro/XP Media Center
 Intel Pentium processor at 133 MHz

20MB for the program and 5 to 10% of the total hard drive space (at least 1000 MB) for backup activities.
 256 MB of RAM
 10/100Mbps Network Adaptor
 TCP/IP Internet Protocol
 Microsoft Internet Explorer 5.5 or higher
 CD/DVD recorder (optional)
2-2 Installing RITN Administrator
Follow the steps below to install RITN Administrator on the server computer of the LAN:
1. Insert the RestoreIT Network CD-ROM disc. The Installation Guide (shown below) should start
automatically. If it does not, run autorun.exe directly from the disc.
2. Click RestoreIT Network Administrator to start the Setup wizard.
3. When the RITN Administrator install screen appears, select Next to go to the next step.
4. When the License Agreement screen appears, select I accept the terms… to continue.
5. Enter the required information and your serial number. Select Continue to continue.