User Guide

Note

1. Normally there is only one hard drive installed in a computer, and you can skip to selecting the partition(s)

you would like to protect.

2. If there is more than one hard drive, you can choose only one drive at a time.

3. You can select one or more partitions from a hard drive to back up at the same time. If you want to back up

an entire hard drive, select all of the partitions on the drive.

Step 3 Click Browse to select a location on a hard drive, USB storage medium, or a network location, and enter a

name for the image file.

Note: If you want to store the image on a network location, you can select the location through Windows, My Network

Places, directly enter the full path and the file name (fig. a), or click Browse to select thefile(fig. b) (LAN path eg:

\\192.168.0.111\ShareDir\Image.sco).

You can add comments in the Image File Description box below. Then click Next to continue.

Fig. a

Fig. b

Note

1. If you have a CD writer (USB recorders are supported), you can also select to burn the image

onto a blank CD/DVD. The CD/DVD burned by DriveClone can be used as a start-up disc. It is

also known as a Recover CD/DVD.