User Guide


15
Maintenance
e Maintenance tab is used to schedule a time when Deep Freeze is awed. A awed workstation is
available for upgrades, new installations, maintenance, or any other permanent changes.
To create and configure a Maintenance Schedule, complete the following steps. As indicated, some of
the steps are optional:
1. Check Enable awed Maintenance Schedule to enable the schedule.
2. Check the box beside each day of the week when a Maintenance schedule is desired.
Optional
: Check Set One Change All to apply certain changes made for one day of the week
to all other days.
3. Enter the time to restart the workstation into the awed state in the Start Time field.
4. Optional: Check Disable Keys to prevent the keyboard and mouse from functioning on the
workstation during the Maintenance period.
If this option has been checked, the workstation displays the following dialog during the
Maintenance period: