Safety Manual

Repetition rate Approx. 125 MHz
Optical power approx. 800 mW
Beam divergence Typical 0.3 mrad (0.024°)(1/e)
Beam diameter at exit Typical 2.12 mm (1/e)
Multi-Sensor
Dual axis compensator:
Levels each scan: 19 arcsec;
Range ±2°
Height sensor:
Via an electronic barometer the
height relative to a fixed point can
be detected and added to a scan.
Compass
*
:
The electronic compass gives the
scan an orientation.
GNSS: Integrated GPS & GLONASS
*
Ferromagnetic objects and electromagnetic fields can disturb the
earth magnetic field. This, as well as local variations in earth mag-
netic field (magnetic declination or variation), can lead to inaccurate
measurements.
Ambient Conditions
Ambient Temperature:
+5°C to +40°C (+41°F to +104°F)
Extended operating
temperature of the scan-
ner:
-10°C to +55°C (+14°F to +131°F)
Low temperature operation: the scan-
ner must be powered on while internal
temperature is at or above +15°C
(+59°F)
High temperature operation
*
: addi-
tional accessory thermal cover
required, further information on
request.
Storage -10°C to +60°C (+14°F to +140°F)
Environment:
Indoor and temporarily outdoor use,
pollution degree 2
Humidity: Non-condensing
Altitude: < 2000 m (6561 ft)
IP rating of the scanner
when in an upright pos-
ition:
IP54
*
For extended operation at 55°C (131°F): Cool down the accessory
thermal cover to -15°C (5°F )or colder and store the scanner below
25°C (77°F). Prepare scanner with thermal cover and without any
other accessory. Turn it on. Scanning is possible for 1 hour. Then
turn the scanner off to cool it down to below 25°C (77°F) for 2
hours before scanning again with a cooled thermal cover.
Disposal
At the end of its life-cycle, this product must not be dis-
posed with normal waste, but instead must be returned to
a recycling facility for electric and electronic devices.
Contact your local government or local waste disposal
operators to ensure you comply with local laws.
Technical Support
FARO Technologies, Inc. is committed to providing the best tech-
nical support to our customers. Our Service Policy is detailed under
Industrial Service Policy in the user manual. If you have any dif-
ficulties using one of our products, follow these steps before con-
tacting our Technical Support Team:
FOCUS Premium and FOCUS Core Safety Manual
6
l
Be sure to read the relevant sections of the documentation.
l
Visit the FARO Customer Care area on the Web at www.-
faro.com to search our technical support database. This is avail-
able 24 hours a day 7 days a week.
l
Document the problem you are experiencing. Be as specific as
you can. The more information you can give us, the easier the
issue is to solve.
l
If you still cannot resolve your issue, have your device's serial
number available before calling.
l
Emails or faxes sent outside regular working hours are usually
answered before 12:00 noon the next working day. If our staff
are on other calls, leave a voice mail. Calls are always returned
within 24 hours on business days. Remember to leave a detailed
description of your difficulty along with your device's serial
number. Do not forget to include your name, fax number, and
telephone number with extension, so we can promptly reach
you.
Certifications
NOTE: See also the last few pages of this manual. Additional com-
pliance information can be found on the scanner's screen under Man-
age > Regulatory Information.
European Union
CE Declaration of Conformity
Hereby, FARO Technologies, Inc. declares that the radio equipment
type FARO Focus Premium is in compliance with Directive
2014/53/EU.
The full text of the EU declaration of conformity is available at the
following Internet address:
https://www.faro.com/en/Support-Overview/Technical-
Documentation/Certificates
FARO Technologies, Inc. is represented in Europe by FARO Europe
GmbH, Korntal-Münchingen, Germany.
Frequency Power
2402 ~ 2480 MHz 11 dBm
2412 ~ 2472 MHz 20 dBm
5150 ~ 5350 MHz 23 dBm
5470 ~ 5725 MHz 23 dBm
13.56 MHz -2 dBuA/m
SW version: 7.0.0.6861 (Focus Premium), 7.0.0.8517 (Focus Core)
RF exposure statement
The minimum distance between the user or any bystander and the
radiating structure of the transmitter is 20 cm (7.87 in).
5150 ~ 5350 MHz is limited to indoor use in these countries: