Instructions / Assembly

Paso 3
Haz el ensamblaje del eje delantero
a la superficie del remolque con (4)
pernos hexagonales M8x20, (4)
arandelas M8 y (4) contratuercas
M8. Aprieta todos los pernos
firmemente.
Step 3
Assemble the front axle assembly
to the bed using M8x20 hex bolts
(4), M8 washers (4) and M8 lock
nuts (4). Tighten bolts securely.
Paso 5
Monta las ruedas en el orden siguiente:
1. Coloca los (2) espaciadores de ruedas en el eje trasero.
2. Coloca las ruedas en los ejes con los vástagos de las válvulas hacia afuera.
3. Asegura las ruedas con (4) arandelas M16 y pasadores de chaveta.
Step 5
Attach the wheels in the following order:
1. Place the wheel spacers (2) onto the rear axle.
2. Place the wheels onto the front and rear axles with the valve stem facing out.
3. Secure the wheels using M16 washers(4) and cotter pins (4).
Paso 4
Fija el eje trasero a la superficie
del remolque con (4) pernos
hexagonales M8x20, (4)
arandelas M8 y (4) contratuercas
M8. Aprieta todos los pernos
firmemente.
Step 4
Attach the rear axle to the bed
using M8x20 hex bolts (4), M8
washers (4), and M8 lock nuts (4).
Slide the rear struts onto the rear
axle and attach both to the bed.
Tighten bolts securely.