5370 Barranca Parkway Irvine, CA 92618-2215 USA DTC1000_DTC4000 User Guide © 2009 HID Global Corporation. All rights reserved. DTC1000_DTC4000 Card Printer/Encoder User Guide (Rev 1.1), © 2009 property of HID Global Corporation. All rights reserved.
Exclusive permission is granted to authorized resellers of HID Global products to reproduce and distribute this copyrighted document to authorized HID Global customers, who have signed a no disclosure agreement regarding the restricted, proprietary use of said document. The revision number for this document will be updated to reflect changes, corrections, updates and enhancements to this document. Revision Control Number Date Document Title Revision 1.
Printer Components: Blank Cards ________________________________________________________________14 Section 2: Setup and Installation Procedures ____________________________Error! Bookmark not defined. Choosing a Good Location ________________________________________________ Error! Bookmark not defined. About Moisture Condensation ___________________________________________ Error! Bookmark not defined. Unpacking and Inspection_______________________________________________ Error! Bookmark not defined.
Section 10: HID Global Technical Support _____________________________Error! Bookmark not defined. Reading the Serial Numbers on a Fargo Printer_________________________________ Error! Bookmark not defined. Appendix A ________________________________________________________Error! Bookmark not defined. Using the Defined Area Option _____________________________________________ Error! Bookmark not defined.
Section 1: Specifications The purpose of this section is to provide you with specific information on the Regulatory Compliances, Agency Listings, Technical Specifications and Functional Specifications for the DTC1000_DTC4000 Card Printer User Guide. Regulatory Compliances Term Description CSA The Printer manufacturer has been authorized by UL to represent the Card Printer as CSA Certified under CSA Standard C22.2 No. 60950-1-03.
Standards EN55022, EN55024, EN61000-3-2, EN61000-3-3, Safety Standards UL IEC 60950-1 (2001), CSA C22.2 No. 60950-1-03. United States This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
Safety Messages (review carefully) Symbol Critical Instructions for Safety purposes Danger: Failure to follow these installation guidelines can result in death or serious injury. Information that raises potential safety issues is indicated by a warning symbol (as shown to the left). Caution: To prevent personal injury, refer to the following safety messages before performing an operation preceded by this symbol.
Traditional Chinese RF Emissions and Safety Statements Technical Specifications Term Print resolution Printer Memory Function 300 x 300 dpi(11.8 dots/mm) Up to 16.
Print Area CR-80 (3.375"L x 2.125"W / 85.6mmL x 54mmW) Print Method Dye Sublimation/Resin Thermal Transfer Printer Driver & System Requirem ents Windows XP, Server 2003 and 2008, Vista 32-bit and 64-bit compliance, Linux distributions-Red Hat, open SUSE, SUSE Enterprise, Ubuntu, Fedora Core Mac OS X version 10.0 to 10.
resources at the time of the print.
Card Size and Types Supported CR-80 (3.362"L x 2.114"W / 85.4mmL x 53.7mmW) CR-79 (3.303”L x 2.051”W / 83.7mmL x 51.9mmW 10 mil to 40 mil card thickness Re-writable card technologies (requires special rewritable cards) PVC, Polyester cards with a polished PVC finish Printer Dimension s DTC1000: 8.83"H x 11.85"W x 8.65"D (weight): 7lbs DTC4000 with Flipper (includes input Hopper): 9.71"H x 18.52"W x 9.92"D (weight): 10 lbs DTC4000 without Flipper (includes input and output Hoppers): 9.
The Card Printer utilizes both dye-sublimation and/or resin thermal transfer methods to print images directly onto blank cards. Since the dye-sublimation and the resin thermal transfer print methods each provide their own unique benefits, Print Ribbons are available in resin-only, dye-sublimation-only and combination dye-sublimation/resin versions. To make it easier to remember which Print Ribbons are which, a letter code has been developed to indicate the type of Ribbon panels found on each Ribbon.
Black/Overlay K – Standard Resin 1000 1000 K – Premium Resin 1000 1000 Colored Resin 1000 1000 Metallic Resin 1000 1000 KO - Premium Black Resin/Overlay 500 500 BO - Dye-Sub Black/Overlay 500 500 Supported Supported None – Rewritable Printer Components: Blank Cards Type Description Card Size The Card Printer accepts standard CR-80 and CR-79 sized cards.
photo quality finish. These cards are manufactured to ensure clean, scratch-free cards for high-quality prints and extended Printhead life.
