User's Manual
Table Of Contents
- _
- _
- How to use the guide
- Safety Messages (review carefully)
- HDP100 Overview
- Safety Messages (review carefully)
- Introduction
- Reviewing the HDP100 Printer Overview table
- Regulatory Compliances, Agency Listings and FCC Rules
- Regulatory Compliances
- Agency Listings
- Technical Specifications
- Functional Specifications
- Reviewing the Overlaminates
- LCD Messages
- Troubleshooting LCD Messages
- Communications Errors
- Card Feeding Errors
- Magnetic Encoding Errors
- E-card Encoding Errors
- Film Errors
- Printing Process Errors
- Card Lamination Errors
- Printing a Test Image
- _
RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP100 High Definition Card Printer/Encoder User Guide (Rev. Beta)
7
Technical Specifications
Term Description
Accepted
Standard Card
Sizes
HDP100 and HDP100-LC (See Card tab under Printer
Adjustments):
CR-80: This selection is the default form size for the HDP100.
This will print a 3.375 in. L x 2.125 in. W (85.6mm L x 54mm W)
image including a .04 over-bleed on each of the 4 sides.
Card Size supported is 2.204 X 3.452 (56 X 87.7 mm. )
Accepted Card
Thickness
.030 in. (30 mil) to .050 in. (50 mil) (.762mm to 1.270mm)
Accepted
Electronic Card
types
HID Proximity Cards, Mifare Contactless Smart Cards and Contact
Smart Cards
Accepted Card
Compositions
ABS, PVC, PET and PETG
Colors Up to 16.7 million colors and 256 shades per Pixel.
Card Cartridge
Capacity
HDP100 and HDP100-LC:
100 cards (.030in./.762mm)
Has refillable Card Cartridge that can either be attached to the
Printer or detached for storage. This allows single feed with the
Card Cartridge removed or with no other cards in the Card
Cartridge
Card Output
Hopper Capacity
HDP100 and HDP100-LC:
250 card Output Hopper capacity (Includes Reject Hopper
capability when connected to the Flipper Module with available
storage on the Output Tray or the Lamination Module)