2
# % % -(7 *8 () *9 -(7 *8 7 *9 - ( ' 8 + 6 *()* 0 / ! ! / / > 3 ? ! ! / @1 : 8A+ @0 8 # :A @ & # A
# & + / / + 3 + 3 ? + / + C x * "= + + + 6 x 8 / x #
Inlet hose with faucet adapter 1Pc Self screw 2Pcs 7 Noise and miceproof plate Instruction manual 1Pc 1Pc
WARNING： Certain internal parts are intentionally not grounded and may present a risk of electric shock only during servicing. Service Personnel – Do not contact the following parts while the appliance is energized, unplug this machine.
! # & % ! " x 8 6 3 x ' C x 0 x * x ! x 3 / C " x # % x x * * 0 7 ! x 1 % / x 8 / = # / E F
2. Then connect the other end of water inlet hose to the cold connector in water mixing valve by turning the connecting nut. 1. Connect the water inlet hose to the faucet by turning the connecting nut. Rubber ring seal CONNECTING NUT WATER INLET HOSE CONNECTING NUT COLD WATER CONNECTOR Be sure a rubber ring is inside the connecting nut.
11
This appliance should be properly grounded for your safety. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. The power cord of this appliance is equipped with a three prong plug which mates with standard three prong wall outlets to minimize the possibility of electrical shock. Do not under any circumstances cut or remove the third ground prong from the power cord supplied.
13
14
! # " & 9 3 C 5
HEAVY 16
WARNING： Certain internal parts are intentionally not grounded and may present a risk of electric shock only during servicing. Service Personnel – Do not contact the following parts while the appliance is energized, unplug this machine.
& % ! " x / / x / + / x 8 & /
