Stainless Steel Cordless Electric Kettle Model Number: 550243 UPC: 4897074550243 Customer Assistance 1-855-451-2897 (US) Please consider the option to recycle the packaging material. Water Kettle_550243_ IM_US_V4_181015.
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: • Read all instructions before use. • Do not touch hot surfaces. Use handles or knobs.
-- The longer cord should be arranged so that it does not drape over the countertop or table top where it can be pulled on by children or tripped over unintentionally. GROUNDING INSTRUCTIONS • This appliance must be grounded while in use. Do not remove or ignore the grounding pin during use. WARNING: -- To ensure continued protection against risk of electric shock, connect to properly grounded outlets only. SAVE THESE INSTRUCTIONS! PARTS 14 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14.
e g f h 1.7L MAX 1.5L 1.0L 1.7L 1.7L MAX 1.5L MAX 1.5L 1.7L MAX 1.5L 0.5L MIN 1.0L 1.0L 1.0L 0.5L MIN 0.5L MIN 0.5L MIN j i l k 2. MAX 1.7L 1.5L 1.0L 1.0L 0.5 min 0.5L MIN 1.0L 1.7 max 1.5 0.5L MIN 1.7 MA L 1.5L X 1.7L MAX 1.5L 1.5 1.0 1.0 1.0L 0.5L MIN 1.7 max 1.0L 1.7L MAX 1.5L 0.5 min 0.5L MIN 1.0 0.5L MIN 1.7 1.7L max MAX 1.5 1.5L 0.5 min 1. n m o p 1. 1.7L MAX 1.5L 1.0L 1.7L 0.5L MIN MAX 1.5L 2. 1.0L 0.
NOTE: -- The appliance has a rated power of 1500W. Before plugging it into the wall outlet, ensure that the electrical circuit is not overloaded with other appliances. This appliance should always be operated on a separate 120V ~ 60Hz wall outlet. -- Make sure the appliance is switched off before connecting it to a wall outlet. • Place the power cord (7) in the power cord outlet (6) of the base unit (5) (ill. a ). • Place the base unit (5) on a clean, flat and heat-resistant surface.
NOTE: -- Allow the appliance to cool down before using it again. Do not add cold water immediately to the kettle (10). • Disconnect the plug (7) from the wall outlet (ill. m ) once the appliance is no longer in use. Boil-dry function This appliance is equipped with boil-dry function, which automatically switches the appliance off in case it was switched on without any water in the kettle. If this occurs, unplug the appliance and allow it to cool down completely before using it again.
NOTE: -- Dry all parts and surfaces thoroughly before use. Make sure that all parts and surfaces are completely dry before connecting the appliance to a wall outlet. Descaling Periodically descale your appliance to ensure it keeps operating effectively and remove any lime scale build-up. We recommend removing lime scale deposits as follows: • Open the lid (1) by pushing the lid release button (2). Ensure the water filter (14) is correctly placed inside the kettle (10).
TROUBLESHOOTING Problem The appliance is not working Cause Appliance not plugged in Wall outlet not energized Boil-dry function activated Damaged electrical contacts on the kettle / base unit The appliance is working but the power indicator does not light up Solution Insert the plug into the wall outlet Check fuses and circuit breaker Disconnect the appliance from the wall outlet and allow it to cool down Disconnect the appliance from the wall outlet and contact qualified personnel to check and repair th
CUSTOMER ASSISTANCE If you have a claim under this warranty, please call our Customer Assistance Number. For faster service, please have the model number and product name ready for the operator to assist you. This number can be found on the bottom of your appliance and on the front page of this manual.