User Manual

SOUNDPEATS
3
2. Put the earbuds into the charging case to reset.
3. Take the earbuds out of the charging case, one earbud will flash red and
white lights, the other one will stay in white. At this time, please turn on the
Bluetooth of your device to connect.
 What can I do if the left earbud and the right earbud won’t work
together?
1. Please use a piece of light sandpaper or microfiber cloth with a bit of
rubbing alcohol to clean the charging connectors to ensure the earbuds charge
well.
2. Put them back into the charging case to reset.
 What can I do if the earbuds connect to my phone, but not my
computer?
1. UNPAIR the earbud from the phone, then the earbuds will lose Bluetooth
connection to the phone and enter into pairing mode.
2. Put the earbuds into the charging case to reset.
3. Take them out of the case. One earbud will flash red and white light, the
other earbud will stay in white. At this time, please turn on the Bluetooth of your
computer to connect.
4. If those do not help, you may need to update your computer's Bluetooth
driver, which does not require a special driver itself and there is no driver for it.
Bluetooth drivers must come from the specific manufacturer for your exact
computer model. Download and install the appropriate Bluetooth driver from
the computer vendor's website, then restart your system before attempting to
pair and connect to your SoundPEATS earbuds.
SOUND
 Why does the volume of the earbuds reduce after using a period of
time?
The sound hole may have been blocked by foreign objects. Please clean the
earbuds regularly to avoid dust or secretions blocking.