User Manual

(5) If the steps above still do not work, please try to delete the APP
"VeryFit" and download it again to test. Or try to click "Reset" on the
watch and pair it again to test.
Why does Bluetooth keep disconnecting?
(1) Make sure the distance between the phone and watch does not exceed
15m, otherwise the signal may be too weak.
(2) Make sure there is nothing between the phone and watch that might
obstruct the Bluetooth signal, such as your body, or metal objects, such as
jewelry.
(3) Make sure the watch battery has enough power to use Bluetooth and
turn on the screen.
(4) Make sure your phone's Bluetooth is working. Try closing all APP's, and
then disable and re-enable Bluetooth.
(5) If the "VeryFit" APP is running in the background, iOS may close the
APP automatically, which can cause Bluetooth to disconnect.
(6) Bluetooth may automatically disconnect if your phone is in power-
saving mode or if you are using a phone manager APP. Please check your
phone settings and then try again. The watch does not download weather
data directly.
Is the watch waterproof? Can I wear it in the shower?
The watch is 5ATM water-resistant, supporting swimming, and can be
worn in the shower. But the water temperature needs to be controlled
below 40℃.
Why doesn't the screen always turn on when I raise my wrist?
We have adapted this feature to prevent the screen from turning on by
accident, such as when you move your arms while asleep. To turn on the
screen, twist your wrist so that the screen faces upwards. We recommend
that you practice this action until you get familiar with the optimum tilt
angle.
Why can't I sync sleep data? Why is the sleep data inaccurate?