User Manual

top-left corner. (If Bluetooth is connected, the Bluetooth symbol in the
upper left corner is static, if not, the Bluetooth in the upper left corner will
be flashing).
(4) Make sure your phone's Bluetooth is enabled and working. Try closing
all APP's, disable and re-enable Bluetooth, and then connect again.
(5) Make sure the watch's screen is on during the pairing process,
otherwise pairing may fail. If there is no problem with the above, it is
recommended to go to Settings> Bluetooth on your phone, forget
"ID206" and pair it again or download the APP again!
How do l use message notifications?
The watch supports SMS, Messenger, WhatsApp, Snapchat, Telegram,
Skype, and email notifications. These can be configured through the
"VeryFit" APP.
(1) Ensure that the watch is connected to your phone via Bluetooth.
(2) When you receive a message, the notification icon on the watch
displays the notifications count. You can view the last ten notifications that
were received.
(3) Swipe right to delete the message notification.
Why cant I receive Messenger, SMS, or incoming call notifications on
my watch?
(1) In the "VeryFit" APP, click "Device", enable the "Message Notification"
feature, switch on "Call Reminder", and sync your phone with the watch.
On iOS devices, you must allow Bluetooth pairing before configuring this
feature.
(2) Ensure that Bluetooth is always connected. The watch does not display
notifications for messages or calls that are received while Bluetooth is
disconnected.
(3)Messenger notifications are not shown if "Do Not Disturb" is enabled in
Messenger.
(4) On your iPhone (iOS 9.0 or above), go to [Settings] > [Bluetooth] >
click "i" symbol on the device to be paired in [ID206] > enable [Share
System Notification].