User Manual

ManualsBrandsFAQs ManualsOtherFAQS How to bind the watch to your phone?

Table Of Contents

The FAQ Of Gydom ID207
- 1.How to bind the watch to your phone?(Set up)

The FAQ Of Tensky ID207

1. How to bind the watch to your phone?(Set up)

Please scan the QR code below to install the "VeryFit" app, or download

it from App Store or Google Play. (Please don't connect the watch via the

Bluetooth pairing list of your phone.)

① Open the VeryFit app, allow the request to enable the Bluetooth

function of your phone to connect the watch.

② Select "ID207" on the VeryFit app-> Click "Confirm Bind Device”.

After binding, fill in your age/weight/height correctly.

③ Then a progress bar will appear at the top of the VeryFit app → It will

take 1-2 mins to sync the date/time and your info. The pairing will be

done once it reaches 100%. *lf disconnection occurs, you just need to

swipe down the homepage of VeryFit app app to reconnect.

Summary of content (9 pages)

PAGE 1
The FAQ Of Tensky ID207 1. How to bind the watch to your phone?(Set up) Please scan the QR code below to install the "VeryFit" app, or download it from App Store or Google Play. (Please don't connect the watch via the Bluetooth pairing list of your phone.) ① Open the VeryFit app, allow the request to enable the Bluetooth function of your phone to connect the watch. ② Select "ID207" on the VeryFit app-> Click "Confirm Bind Device”. After binding, fill in your age/weight/height correctly.
PAGE 2
VeryFit app is compatible with most iOS 9.0 & Android 6.0 above smartphones. Not suitable for PC or tablet. 2. How to active the call/text messages/SNS notification function? Turn on both “Call Alert” & “SNS Alert” function in the VeryFit app: Open app → Click “Device” below → Turn on “Call Alert” & “SNS Alert” → Switch on the app you need to get notification from → Click the “√” icon at the top right to save the settings. 3.
PAGE 3
① Please give Phone/Messaging/Call log permissions when you install the VeryFit app for the first time. ② Turn on both “Call Alert” & “SNS Alert” function in the VeryFit app: Open app → Click the “Device” below → Turn on “Call Alert” & “SNS Alert” function in the VeryFit app → Click the “Device” below → Turn on “Call Alert” & “SNS Alert” → Switch the app you need to get notification from → Click the “√” icon at the top right to save the settings.
PAGE 4
Note: The watch won’t receive any notification if messages/calls/SNS notifications didn’t appear on dropdown of your phone, make sure they are able to show up: Phone Settings → Notifications → Find the app you need to get notification from → Allow Notifications.
PAGE 5
the pic above.) ④ Go to the homepage of VeryFit app and swipe down the screen to finish the synchronization. If the watch still can’t receive any notification: Please delete the “ID207” from the Bluetooth paired devise list from your phone → Delete VeryFit app and download again → Repeat the step #1-3. For Android: 1 Please give Phone/Messaging/Call log permissions when you install the VeryFit app for the first time.
PAGE 6
<2>Phone Settings → Find “VeryFit” app → Launch settings → Switch on “Run in background” *Please make sure your phone’s dropdown can show you the message notification when it comes in.
PAGE 7
finish the synchronization. If the watch still can’t receive any notification: Please delete the “ID207” from the Bluetooth paired devise list from your phone → Delete VeryFit app and download again → Repeat the step #1-3. 4. How to measure my heart rate more accurately? 1 Please make sure your personal info(age, height, weight) in VeryFit app filled in correctly.
PAGE 8
2 This watch counts steps by a built-in 3D gravity sensor, and the step counting result is affected by the user's swinging arm posture, stride length, body type, road level or slope, and other factors. So it may have some tolerance errors when using. However, after many tests, the step counting data of our watch will not exceed 10% error from the actual. You can test whether it is accurate by walking 100 steps outdoors. (If the number of steps is less than 30, it may not be recorded.) 6.
PAGE 9
You can turn it off in the VeryFit app: Open the app → Click "Device" below → "Heart Rate Detection" → Choose "Manual". Worry-Free Warrant Hey! We back our products all with 12-month warranty and provide lifetime, friendly, easy-to-reach support. If you have any other issue while using. Please feel free to contact us via your order(We will reply within 24hrs): 1.Go to Your Orders 2.Find the order ID in the list 3.