User Manual

4

Connecting Hardware Types:
Brackets: are only about 50mm square and require a hole in the glass, up to 2m high you will
need 2 up the wall and one on the base per fixed panel. They come in either chrome or satin
nickel plated brass and satin stainless steel. For a corner joint between glass panels you will have
to use brackets to mechanically fix them together then use a clear silicone to seal the gaps in
between.
If the wall and tray aren’t plumb then you can use a glazing channel to absorb the run-out,
screwed to the wall then silicone seal the glass in place. To achieve a more concealed fixing (if
you are in a position to do so) attach the channel to the wall before tiling up to it, we have
polished (SH/GGA/C32, C50) and brushed finish (SH/GGA/C40) to match any bathroom
fixtures or a natural anodized for a cost-effective option (SH/GGA/C29).
SH/GGA/C32 U Channel
SH/APH/B07 Wall Mount Bracket
SH/APH/B02 Glass to Glass Bracket