Tus neeg siv phau ntawv

General purpose). If LED bulbs, then normal dimmable bulbs. FEIT (OM75DM/930CA) is not
compatible for our dimmer right now. Smart bulbs won't work with the smart dimmer switch.
4 ： There is no indicator light when I press and hold the switch for 5
seconds. Is this a bad switch?
Could you tell us do you have Neutral and Load wires in your wall box and kindly make sure that
the wiring's are properly connected? Could you confirm your wiring: white wire - Neutral wire;
black wire - Live wire; Red wire - Load wire; Green wire - Ground wire?
Some tips :
1) Get a voltage tester . It is cheap and helps a lot in finding cables and for safety.
2) Neutral wire (white wire) maybe in the back of the box wrapped and unused. You need
it for the switch.
3) Please do not just connect cables of same colors. A voltage tester helps a lot. In some
case, red cable from the wall is live cable which you have to connect to black cable on the switch
and black cable from wall (load cable) have to be connected to red cable on the switch.
4) Load wire usually comes from top of the box (that is the wire that goes to light) have no
current unless switch is turned on. Output is 110V. Please refer to the attached file for reference
and short videos.
Learn how to install our switch(es) efficiently, please check the below YouTube video link:
https://youtu.be/Fflvy4I7M6I
Learn how to distinguish wires, this video is for your reference: https://youtu.be/qyAPIui38HE
Suggestion: It's better to make marks with label stickers for wires before removal and
replacement.