Installation Guide

Products can be easily installed without any tools and can be done in a few
simple steps.
Installation Instructions:
2
Remove the existing shower head.
1
Before connecting, please make
sure that a washer is in between
the hex nut and the 3-way diverter.
Missing a washer could cause leak.
2
Attach a 3-way diverter to the
shower arm by rotating the bolt
clockwise by hand then lightly
tighten with a wrench.
Check the washer and attach the
shower head to the 3-way diverter.
3
4
E-mail: [e-mail]