Instructions

5 / 6
3 Instructions for use
3.1 Scan
Open the scan tool and click the scan button on the right to scan the azimuth devices in
the local area network.
3.2 Change Parameter
IP scanning tool supports modifying device IP address and device description
information
1) Select the device to be modified
2) Click the Modify Parameters button on the right
3) You can see the information as shown in the figure below. If the device uses DHCP,
DHCP is checked, and the IP address cannot be modified at this time; when the DHCP
check is removed, the device network can be modified to a static IP. Support modifying
IP address, subnet mask, gateway; after setting the information to be modified, you need
to enter the user name and password of the device (administrator user name and
password)
4) After the modification is completed, click Submit, wait for the prompt to modify the