IP Scan Tool Instructions Version:<1.
Content Content ...............................................................................................................................................2 1 Revise History ................................................................................................................................ 3 2 Introduction ................................................................................................................................... 4 2.1 Overview .........................................
1 Revise History Revise History: Version 1.0 Author Release Time Description 2020.9.
2 Introduction 2.1 Overview Products without screens are not very convenient to deploy and use. Fanvil IP scanning tool is convenient to obtain device information and modify network parameters. This document mainly introduces the use of IP scanning tools. 2.2 Applicable Model This document applies to Fanvil i12, i16V, i18S, i20S, i23S, i30, i31S, i32V, i33V/i33VF, PA2,etc. 2.3 Target Audience This document is for people using IP scanning tools.
3 Instructions for use 3.1 Scan Open the scan tool and click the scan button on the right to scan the azimuth devices in the local area network. 3.2 Change Parameter IP scanning tool supports modifying device IP address and device description information 1) Select the device to be modified 2) Click the Modify Parameters button on the right 3) You can see the information as shown in the figure below.
parameters successfully, and you can see the setting information in the scan list. 3.3 Set Language The IP scanning tool supports setting the language, you can choose Chinese or English, as shown in the following figure: It takes effect immediately after setting.