User's Manual
Table Of Contents
- Directory
- 1 Picture
- 2 Table
- 3 Safety Instruction
- 4 Overview
- 5 Install Guide
- 6 Basic Introduction
- 7 Basic Function
- 8 Advance Function
- 9 Web Configurations
- 9.1 Web Page Authentication
- 9.2 System >> Information
- 9.3 System >> Account
- 9.4 System >> Configurations
- 9.5 System >> Upgrade
- 9.6 System >> Auto Provision
- 9.7 System >> FDMS
- 9.8 System >> Tools
- 9.9 Network >> Basic
- 9.10 Network >> VPN
- 9.11 Network >> Web Filter
- 9.12 Line >> SIP
- 9.13 Line >> Basic Settings
- 9.14 Line >> SIP Hotspot
- 9.15 EGS Setting >> Features
- 9.16 EGS Setting & Intercom Setting >> Audio
- 9.17 EGS Setting & Intercom Setting >> Video
- 9.18 EGS Setting & Intercom Setting >> MCAST
- 9.19 EGS Setting & Intercom Setting >> action URL
- 9.20 EGS Setting & Intercom Setting >> Time/Date
- 9.21 EGS Settings >> Trusted Certificates
- 9.22 EGS Settings >> Device Certificates
- 9.23 EGS Access
- 9.24 EGS Logs
- 9.25 Door Lock
- 9.26 Alert &Security Settings
- 9.27 Function Key
- 10Trouble Shooting
50
Figure 35 - Alert/Security Settings
Table 21 - Alert/Security Settings
Security Settings
Field Name
Explanation
Input settings
Input Detect
Enable or disable Input Detect
Trigger Mode
When choosing the low level trigger (closed trigger), detect the input port (low
level) closed trigger.
When choosing the high level trigger (disconnected trigger), detect the input
port (high level) disconnected trigger.
Alert
message
sends to
server
Set the Alert message send to server
Output Settings
Output
Response
Enable or disable Output Response
Output Level
When choosing the low level trigger (NO: normally open), when meet the
trigger condition, trigger the NO port disconnected.
When choosing the high level trigger (NO: normally close), when meet the
trigger condition, trigger the NO port close.
Output
Duration
Changes in port, the duration of. The default is 5 seconds.
Alert Trigger Setting
Alarm Ring
Set the Alarm Ring Duration. The default is 5 seconds.