User's Manual

41
VBR: Image quality is preferred, not recommended.
Quality
Video quality adjustment, the better the quality needs to transfer faster
Bit rate
It is proportional to video file size, not recommend adjusted.
I Frame Interval
The greater the value is, the worse the video quality would be, otherwise the
better video quality would be; not recommend adjusted.
Activate
When you selected it, the stream is enabled, otherwise disabled
Encoder static
setting
Baseline: catch the packet for filtering H264, see H264 nal unit payload for
Baseline profile
Main profile/High profile: see the H264 nal unit payload as Main profile/High
profile
"Default" reverts to factory video configuration, and "submit" saves Settings
Advanced Settings
Video Direction
Sendonly: establish video call, and the SDP packet in the invite packet is
Sendonly;
Sendrecv: to create a call, the SDP package in the invite package is
Sendrecv
RTSP Over TCP
The RTSP goes over the TCP protocol
H.264 Payload
Type
Set the h. 264 Payload type. The range is between 96 and 127. The default is
117
Default Call
Stream
Optional main stream and substream
Enable Onvif
Enable the ONVIF feature, and when enabled, discover the device via the
video recorder that supports ONVIF
RTSP Information
Main Stream Url
Access the main address of RTSP
Sub Stream Url
Access the child address of RTSP
Table 14 - Video Setting
9.18 EGS Setting & Intercom Setting >> MCAST
It is easy and convenient to use multicast function to send notice to each member of the
multicast via setting the multicast key on the device and sending multicast RTP stream to
pre-configured multicast address. By configuring monitoring multicast address on the device,
monitor and play the RTP stream which sent by the multicast address.
Table 15 - MCAST parameters
Parameters
Description
Normal Call Priority
Define the priority of the active call, 1 is the highest priority, 10 is the