User's Manual
Table Of Contents
- Directory
- 1 Picture
- 2 Table
- 3 Safety Instruction
- 4 Overview
- 5 Install Guide
- 6 Basic Introduction
- 7 Basic Function
- 8 Advance Function
- 9 Web Configurations
- 9.1 Web Page Authentication
- 9.2 System >> Information
- 9.3 System >> Account
- 9.4 System >> Configurations
- 9.5 System >> Upgrade
- 9.6 System >> Auto Provision
- 9.7 System >> FDMS
- 9.8 System >> Tools
- 9.9 Network >> Basic
- 9.10 Network >> VPN
- 9.11 Network >> Web Filter
- 9.12 Line >> SIP
- 9.13 Line >> Basic Settings
- 9.14 Line >> SIP Hotspot
- 9.15 EGS Setting >> Features
- 9.16 EGS Setting & Intercom Setting >> Audio
- 9.17 EGS Setting & Intercom Setting >> Video
- 9.18 EGS Setting & Intercom Setting >> MCAST
- 9.19 EGS Setting & Intercom Setting >> action URL
- 9.20 EGS Setting & Intercom Setting >> Time/Date
- 9.21 EGS Settings >> Trusted Certificates
- 9.22 EGS Settings >> Device Certificates
- 9.23 EGS Access
- 9.24 EGS Logs
- 9.25 Door Lock
- 9.26 Alert &Security Settings
- 9.27 Function Key
- 10Trouble Shooting
34
Figure 27 - EGS Setting
Table 12 - EGS Setting
EGS Features Setting (Only for Door phone)
Field Name
Explanation
Basic Settings
Switch Mode
Monostable: there is only one fixed action status for door unlocking.
Bistable: there are two actions and statuses, door unlocking and door
locking. Each action might be triggered and changed to the other
status. After changed, the status would be kept.
Initial Value is Monostable
Switch-On Duration
Door unlocking time for Monostable mode only. If the time is up, the
door would be locked automatically. Initial Value is 5 seconds.
Enable Card Reader
Enable or disable card reader for RFID cards.
Card Reader
Working Mode
Set ID card stats:
Normal: This is the work mode, after the slot card can to open the door.
Card Issuing: This is the issuing mode, after the slot card can to add ID
cards.
Card Revoking: This is the revoking mode, after the slot card can to
delete ID cards.
Card Reader HF
Card Data Reverse
Set the HF card data reverse order, the default value is automatic. You
can set it up when the card display is not consistent with the card
number.
Card Reader LF Card
The LF Card Effective Data, the default value is automatic.