User's Manual
Table Of Contents
- Directory
- 1 Picture
- 2 Table
- 3 Safety Instruction
- 4 Overview
- 5 Install Guide
- 6 Basic Introduction
- 7 Basic Function
- 8 Advance Function
- 9 Web Configurations
- 9.1 Web Page Authentication
- 9.2 System >> Information
- 9.3 System >> Account
- 9.4 System >> Configurations
- 9.5 System >> Upgrade
- 9.6 System >> Auto Provision
- 9.7 System >> FDMS
- 9.8 System >> Tools
- 9.9 Network >> Basic
- 9.10 Network >> VPN
- 9.11 Network >> Web Filter
- 9.12 Line >> SIP
- 9.13 Line >> Basic Settings
- 9.14 Line >> SIP Hotspot
- 9.15 EGS Setting >> Features
- 9.16 EGS Setting & Intercom Setting >> Audio
- 9.17 EGS Setting & Intercom Setting >> Video
- 9.18 EGS Setting & Intercom Setting >> MCAST
- 9.19 EGS Setting & Intercom Setting >> action URL
- 9.20 EGS Setting & Intercom Setting >> Time/Date
- 9.21 EGS Settings >> Trusted Certificates
- 9.22 EGS Settings >> Device Certificates
- 9.23 EGS Access
- 9.24 EGS Logs
- 9.25 Door Lock
- 9.26 Alert &Security Settings
- 9.27 Function Key
- 10Trouble Shooting
10
Figure 6 - Set Release
7.4 Auto-Answering
The user can turn off the auto-answer function (enabled by default) on the device webpage, and
the ring tone will be heard after the shutdown, and the auto-answer will not time out.
Web interface: enter [EGS Setting] >> [Features], Enable auto answer, set mode and auto
answer time and click submit.
Figure 7 - Enable Auto Answer
Auto Answer mode:
Disable：Turn off the automatic answer function, the device has a call, ring, will not
time out to answer automatically.
Line1：Line 1 has an automatic call timeout.
Line2：Line 2 has an automatic call timeout.
Line1 and Line2：Line 1 and line 2 have an automatic call timeout.
Lines and IP Call：Line and IP direct dial call timeout automatically answer.
Auto Answer Timeout（0~60）