User's Manual
Table Of Contents
- Directory
- 1 Picture
- 2 Table
- 3 Safety Instruction
- 4 Overview
- 5 Install Guide
- 6 Basic Introduction
- 7 Basic Function
- 8 Advance Function
- 9 Web Configurations
- 9.1 Web Page Authentication
- 9.2 System >> Information
- 9.3 System >> Account
- 9.4 System >> Configurations
- 9.5 System >> Upgrade
- 9.6 System >> Auto Provision
- 9.7 System >> FDMS
- 9.8 System >> Tools
- 9.9 Network >> Basic
- 9.10 Network >> VPN
- 9.11 Network >> Web Filter
- 9.12 Line >> SIP
- 9.13 Line >> Basic Settings
- 9.14 Line >> SIP Hotspot
- 9.15 EGS Setting >> Features
- 9.16 EGS Setting & Intercom Setting >> Audio
- 9.17 EGS Setting & Intercom Setting >> Video
- 9.18 EGS Setting & Intercom Setting >> MCAST
- 9.19 EGS Setting & Intercom Setting >> action URL
- 9.20 EGS Setting & Intercom Setting >> Time/Date
- 9.21 EGS Settings >> Trusted Certificates
- 9.22 EGS Settings >> Device Certificates
- 9.23 EGS Access
- 9.24 EGS Logs
- 9.25 Door Lock
- 9.26 Alert &Security Settings
- 9.27 Function Key
- 10Trouble Shooting
5
6 Basic Introduction
6.1 Panel Overview
i32V i16V
Figure 1 - Panel
Table 3 - Panel introduction
Number
Name
Description
1
IP Camera
Video signal acquisition and transmission
2
Speaker
Play sound
3
Speed dial button
For speed dial, multicast, intercom, IP broadcast and
other functions
4
MIC
Collect voice
5
Card reader area
RFID card reader area,supports IC card and ID card
6.2 Quick Setting
Before proceeding with this step, make sure your Internet broadband connection is working
properly and complete the network hardware connection. The default factory mode of i32V is
DHCP and i16V is static IP address mode. IP address can be viewed by.
In standby mode, long presses the speed dial button for 10 seconds, there will be a beeping
sound and indicator light flashes for 5 seconds, press the speed dial button once within 5