Installation Guide

Picture III
Item
Description
1
Internet Port: Standard RJ45 port 10/100M Adaptive suggest use CAT5 or CAT5E
line.
2
Power Adaptor12V/1A inputleft port is “+”right port is “-”
35
Door Exit SwitchTo connect indoor exit button
46
External Switch/Door LockTo connect door lock, alarm etc.
7
Wiegand Port: To connect wiegand card reader.
89
Door sensor detectionto detect the door open/close status.
10
To mix device voice & remote call voice, then release them together. 1 port is for
record, another port is for GND.
12
Audio Input: To connect a external audio signal.
13
JP1 jumperPicture II
14
JP6 jumperPicture II
JP1, JP6 Jumper
Door lock control include 2 models (default is internal power supply), see as below,
Internal power supply: If electric lock starting current less than 500mA/12V, can use internal drive model,
electric lock port is 12V DC output.
(Picture IV
Wiring Description
NO: Normal Open, working status electric lock is
open
COM: Common port
NC: