DP88A SIP DOOR PHONE QUICK INSTALLATION GUIDE Catalogue 1. Packing List 2. Material Specification 3. Installation 4. Get the device IP address 5. Door Access Configuration 6.
1. Packing List DP88A Device 2.
（Picture III） Item 1 2 3、5 4、6 7 8、9 10 12 13 14 Description Internet Port: Standard RJ45 port，10/100M Adaptive，suggest use CAT5 or CAT5E line. Power Adaptor：12V/1A input，left port is “+”，right port is “-” Door Exit Switch：To connect indoor exit button External Switch/Door Lock：To connect door lock, alarm etc. Wiegand Port: To connect wiegand card reader. Door sensor detection：to detect the door open/close status. To mix device voice & remote call voice, then release them together.
Normal Closed, working status electric lock is closed； Power Supply Type Internal External √ Electric Lock type Power off, door open Wiring Diagram JP6 Jumper Wiring Diagram √ √ √ √ Power Supply Type √ JP1 Jumper √ √ Internal Power on, door open External √ Electric Lock type Power off, door open √ Power on, door open
√ √ √ √ √ √
3. Installation Drill 4 holes on the wall, space is 60*120mm(DP88 space is 60*180mm), insert Plastic expansion 1. tube, use KA4*30 screws to fix back panel on the wall. (see Picture V) 2. Use 4 pcs M3*8 screws from the front panel to fix back panel(DP88 use 6 pcs screws).(Picture VI) 4. Get the device IP address After device connect to the power supply, default way to get IP address is DHCP. Press “963 + call button”, the device voice will read IP address, then also device LCD will display IP address.
Configure SIP Account To configure SIP account, Active, register name, username password , SIP server address & port, then submit. To configure Door Access Parameter 1. In “Access- Open Door by DTMF Code” to configure DTMF code of indoor station. 2. In “Access- Access Card” to add RFID card & password. 3. In “Access- Open Door By HTTP” to configure username & password of HTTP door open.
6. Door Open Configuration In “Door Phone- Basic” to configure Switch Model, and Card Reader Model.
