Quick Installation Guide

Screen icon
In hands-free mode
In headset mode
In handset mode
Mute activated
Silent mode
Packaging list
- 2 - - 3 -
Call is on hold VPN activated
Internet connected
Internet is disconnected
X
No IP address
!
Auto-answering
activated
VLAN activated
Disable do not disturb (Blue)
Call Forward activated
SIP hotspot activated
Do not disturb
activated (Red)
Keypad locked
Forward call(s)
New VM Messages
Voice quality level
of call
New SMS
SMS
Received call(s)
Dialed call(s)
Missed call(s)
Configuration via web
1. Get the IP address from the phone: Press key, or Menu >
Status > ETH .
2. Login: Input the IP address in the web browser. The PC and
phone should be in the same IP address segment (The default
username and password are both ‘admin’.)
3. Configure: Select network/account etc, and fill the relevant
content.
4. Save the configuration.
Language setting
1. Press Menu key > Basic > Language.
2. Select the desired language and press OK soft key.
Making a call
Accepting a call
1. Pre-dialing: enter the phone number and pick up the handset.
2. Direct dialing: lift the handset and enter the phone number.
3. Handsfree: enter phone number and press or vice versa.
4. Headset: enter phone number and press or vice versa.
1. Using the handset : pick up the handset.
2. Using the headset : press .
3. Using the handsfree : press .
Configuration
Configuration via LCD menu of phone
1. Press Menu > Advanced (default password 123)
2. Select Network: To configure the Network Settings
(IPv4/IPv6/IPv4&IPv6, DHCP/Static/PPPoE).
3. Select Accounts: To configure enable the account, fill the SIP
server address, port, user name, password etc.
4. Save the configuration.
5. Designated line: press line key, enter phone number and
press dial key.
Wireless network
connected
Wireless network
disconnected
Wireless network failure
Redial
1. Press redial a call number.
IP Phone Handset
Handset Cord
Stand
Power Adapter
(Optional)
Ethernet Cable
Quick Installation Guide
Wall Stand
(Buy separately)
Please follow the instructions in below picture to install the
device.
Bracket desktop installation
Wall mounting (Wall Stand need buy separately)
Connecting to the device
Please connect power adapter, network, PC, handset, and
Note: The installation height of the wall-mounted
bracket is less than 2 meters from the ground.
headset to the corresponding ports as described in below
picture.
① Power port: connect the power adapter.
② Network port: connecting local area network or Internet.
③ PC port: the network port connect to the computer.
④ Headset port: connect headset.
⑤ Handset port: connect IP Phone handset.
Internet DC 5VPC Headset Handset
⑤④
③
① ②
Network connect
Using Ethernet
1. The power on the device and connect the WAN port of the
phone to the RJ45 socket of a hub/switch or a router
(LAN side of the router) using the Ethernet cable.
2. The default is DHCP mode.
Using WiFi
1. The power on the device and make sure the phone is idle.
2. Press Menu > Basic > WLAN, Enabled the WiFi Feature.
3. Press scan to search for currently available wireless network.
4. Enter the available network and select the WiFi you want to
connect.
5. Press connect soft key and enter the appropriate password to
connect to the WiFi. The default is DHCP mode.
Key features
In idle mode:
activate/deactivate silent mode
In communication mode:
mute/un-mute a call
In idle mode or during ringing:
increase or decrease ringer volume
In communication:
increase or decrease handset,
headset or hands-free volume
Long press to lock keypad.
Enter PIN to unlock keypad (default 123)
Message waiting indicator
Left and right navigation keys
Up navigation key, Shortcut to call log
Down navigation key, Shortcut to Status
OK key, Shortcut to Menu
Call transfer key
Voice messages key
Conference key
State key
Headset key, Activate/
deactivate headset
Redial key, Access to
redial the last record
Hands-free key, Activate/
deactivate hands free
Phonebook key
Hold key, Hold/Resume the call
Soft keys
DSS Keys, It can be set as line key/ Line keys
function key/speed dial key, etc
Device Installation