V 1.01 X210 Quick Installation Guide Fanvil Technology Co., Ltd www.fanvil.
Packaging list IP Phone Handset Cord Ethernet Cable Stand Power Adapter (Optional) Handset Screen icon In hands-free mode In headset mode In handset mode Mute activated Silent mode Call is on hold Auto-answering activated Call forward activated SMS Disable do not disturb (Blue) Dialed call(s) New SMS New VM messages Voice quality level of call Do not disturb activated (Red) Keypad locked SIP hotspot activated VLAN activated Forward call(s) VPN activated Missed call(s) Bluetooth device
Installation the device Language setting Please follow the instructions in below picture to install the device. Bracket desktop installation 1. Press Menu key > Basic > Language. 2. Select the desired language and press OK soft key. Making a call Connecting to the device Please connect power adapter, network, PC, handset, and headset to the corresponding ports as described in below picture. ① USB port: connect USB device (USB flash drive, WiFi dongle) ② Power port: connect the power adapter.
Fanvil Technology Co., Ltd Website: www.fanvil.com EMail: sales@fanvil.com support@fanvil.
Bluetooth Call forward 1. Press Menu > Basic > Bluetooth. 2. Press OK soft key to enter the bluetooth open interface. After opening, press Scan soft key to display the list of bluetooth scanned. Select any device and press connect. 1. Press Menu > Features > Call Forward. 2. Select the line, the type of forward, enter the destination number and status, and press OK soft key. Call conference WiFi 1. Once in line with 1st caller, press Conference soft key, 1st caller is put on hold. 2.
Regulatory Compliance Federal Communication Commission (FCC) — USA This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
