User's Manual

85
/
125
When using DHCP mode, phone will get the IP address from DHCP server (router).

Use DHCP DNS: It is enabled as default. “Enable” means phone will get DNS address from DHCP
server and “disable” means not.

Use DHCP time: It is disabled as default. “Enable” to manage the time of get DNS address from
DHCP server and “disable” means not.
Picture 114 - PPPoE network mode
When using PPPoE, phone will get the IP address from PPPoE server.

Username: PPPoE user name.

Password: PPPoE password.
Picture 115 - Static IP network mode
When using Static IP mode, user must configure the IP address manually.

IP Address: Phone IP address.

Mask: sub mask of your LAN.

Gateway: The gateway IP address. Phone could access the other network via it.

Primary DNS: Primary DNS address. The default is 8.8.8.8, Google DNS server address.

Secondary DNS: When primary DNS is not available, Secondary DNS will work.

IPv6
In IPv6, there are 2 connection mode options, DHCP and Static IP.

DHCP configuration refers to IPv4 introduction in last page.

Static IP configuration is almost same as IPv4’s, except the IPv6 Prefix.

IPv6 Prefix:IPv6 prefix, it is similar with mask of IPv4.