User's Manual
Table Of Contents
- Directory
- 1Picture
- 2Table
- 3Safety Instruction
- 4Overview
- 5Desktop Installation
- 6Appendix Table
- 7Introduction to the User
- 8Basic Function
- 9Advance Function
- 10Phone Settings
- 11Web Configurations
- 12Network >> Basic
- 12.1Network >> Service Port
- 12.2Network >> VPN
- 12.3Network >> Advanced
- 12.4Line >> SIP
- 12.5Line >> SIP Hotspot
- 12.6Line >> Dial Plan
- 12.7Line >> Basic Settings
- 12.8Line >> RTCP-XR
- 12.9Phone settings >> Features
- 12.10Phone settings >> Media Settings
- 12.11Phone settings >> MCAST
- 12.12Phone settings >> Action
- 12.13Phone settings >> Time/Date
- 12.14Phone settings >> Tone
- 12.15Phone settings >> Advanced
- 12.16Phonebook >> Contact
- 12.17Phonebook >> Cloud phonebook
- 12.18Phonebook >> Call List
- 12.19Phonebook >> Web Dial
- 12.20Phonebook >> Advanced
- 12.21Call Log
- 12.22Function Key >> Function Key
- 12.23Function Key >> Side Key
- 12.24Function Key >> Softkey
- 12.25Function Key >> Advanced
- 12.26Application >> Manage Recording
- 12.27Security >> Web Filter
- 12.28Security >> Trust Certificates
- 12.29Security >> Device Certificates
- 12.30Security >> Firewall
- 12.31Device Log >> Device Log
- 13Trouble Shooting
82
/
125
10.6 Headset
10.6.1 Wired Headset
The device supports wired earphone with RJ9 interface, which can play incoming call sound and talk with
earphone.
After the phone is connected to the headset, the default DSS key of headset will be green light which
indicating that the headset can be used normally.
On the webpage [Phone settings] >> [Features], you can set the headset answering function, and the
ring tone for headset.
Picture 107 - Headset function settings
10.6.2 EHS Headset
Phone into [Menu] >> [Function] >> [Advanced], Select [EHS Headset] , can open EHS Headset (default
closed EHS Headset).
Picture 108 - EHS Headset setting
10.6.3 Bluetooth Headset
The device supports bluetooth application and can be compatible with bluetooth headset with CSR 4.0 chip. It
needs to use USB bluetooth adapter specified by location.Therefore, the device needs to support U disk.
When the device is in the default standby mode,
Press soft-button [Menu] till you find the [Basic] item.
Press [Bluetooth] to enter the setup interface.