User's Manual
Table Of Contents
- Directory
- 1Picture
- 2Table
- 3Safety Instruction
- 4Overview
- 5Desktop Installation
- 6Appendix Table
- 7Introduction to the User
- 8Basic Function
- 9Advance Function
- 10Phone Settings
- 11Web Configurations
- 12Network >> Basic
- 12.1Network >> Service Port
- 12.2Network >> VPN
- 12.3Network >> Advanced
- 12.4Line >> SIP
- 12.5Line >> SIP Hotspot
- 12.6Line >> Dial Plan
- 12.7Line >> Basic Settings
- 12.8Line >> RTCP-XR
- 12.9Phone settings >> Features
- 12.10Phone settings >> Media Settings
- 12.11Phone settings >> MCAST
- 12.12Phone settings >> Action
- 12.13Phone settings >> Time/Date
- 12.14Phone settings >> Tone
- 12.15Phone settings >> Advanced
- 12.16Phonebook >> Contact
- 12.17Phonebook >> Cloud phonebook
- 12.18Phonebook >> Call List
- 12.19Phonebook >> Web Dial
- 12.20Phonebook >> Advanced
- 12.21Call Log
- 12.22Function Key >> Function Key
- 12.23Function Key >> Side Key
- 12.24Function Key >> Softkey
- 12.25Function Key >> Advanced
- 12.26Application >> Manage Recording
- 12.27Security >> Web Filter
- 12.28Security >> Trust Certificates
- 12.29Security >> Device Certificates
- 12.30Security >> Firewall
- 12.31Device Log >> Device Log
- 13Trouble Shooting
67
/
125
is configured, the user can retrieve the voicemail of the default line.
When the phone is in the default standby state,
The Side Key is pre-installed with a voice message shortcut key - [MWI] key.
Press [MWI] to open the voice message configuration interface, and select the line to be configured by
pressing the up/down navigation buttons.
Press the [Edit] button to edit the voice message number. When finished, press the [OK] button to save
the configuration.
In the following picture, “17” in front of the line brackets represents unread voice messages, and “17”
represents the total number of voice messages.
Picture 79 - Voice message interface
Picture 80 - Configure voicemail number
9.9 SIP Hotspot
SIP hotspot is a simple but practical function. With simple configurations, the SIP hotspot function can
implement group ringing. SIP accounts can be expanded.
The users can set functions as a SIP hotspot and other phones set (B and C) function as SIP hotspot clients.
When somebody calls phone set A, phone sets A, B, and C all ring at the same time. When any phone set
answers the call, other phone sets stop ringing. The call can be answered by only one phone set. When B or
C initiates a call, the SIP number registered by phone set A is the calling number.
To set a SIP hotspot, register at least one SIP account.