User's Manual
Table Of Contents
- Directory
- 1Picture
- 2Table
- 3Safety Instruction
- 4Overview
- 5Desktop Installation
- 6Appendix Table
- 7Introduction to the User
- 8Basic Function
- 9Advance Function
- 10Phone Settings
- 11Web Configurations
- 12Network >> Basic
- 12.1Network >> Service Port
- 12.2Network >> VPN
- 12.3Network >> Advanced
- 12.4Line >> SIP
- 12.5Line >> SIP Hotspot
- 12.6Line >> Dial Plan
- 12.7Line >> Basic Settings
- 12.8Line >> RTCP-XR
- 12.9Phone settings >> Features
- 12.10Phone settings >> Media Settings
- 12.11Phone settings >> MCAST
- 12.12Phone settings >> Action
- 12.13Phone settings >> Time/Date
- 12.14Phone settings >> Tone
- 12.15Phone settings >> Advanced
- 12.16Phonebook >> Contact
- 12.17Phonebook >> Cloud phonebook
- 12.18Phonebook >> Call List
- 12.19Phonebook >> Web Dial
- 12.20Phonebook >> Advanced
- 12.21Call Log
- 12.22Function Key >> Function Key
- 12.23Function Key >> Side Key
- 12.24Function Key >> Softkey
- 12.25Function Key >> Advanced
- 12.26Application >> Manage Recording
- 12.27Security >> Web Filter
- 12.28Security >> Trust Certificates
- 12.29Security >> Device Certificates
- 12.30Security >> Firewall
- 12.31Device Log >> Device Log
- 13Trouble Shooting
64
/
125
registered line is the private line.
Picture 75 - Enable SCA
After an account is configured and successfully registered, you can configure lines whose DSS Key is
Shared Call Appearance on the Function Key page to facilitate viewing the call status of the group. Each line
key represents a call appearance. Understand the call status by referring to 6.3 Appendix III –LED .
To facilitate private hold, configure keys whose DSS Key is Private Hold on the Function Key page. Pay
attention that the public hold key is the softkey-hold key during a call.
Picture 76 - Set Private Hold Function Key
Each phone registered with the BroadSoft server should be configured as above, then the SCA function
can be used.
2) LED Status
To facilitate viewing the call status of a group, configure the DSS Key as SCA. The following table describes
the LEDs of lines in different states.