User's Manual

36
/
125
button.

Ending One Call
User may hang up the current talking call by closing the audio channel or press [End] button. The device will
return to single call mode in holding state.
8.3 End of the Call
After the user finishes the call, the user can put the handle back on the phone, press the hands-free button or
Softkey [End] key to close the voice channel and end the call.
Note! When the phone is in the reserved state, the user must press the [Resume] key to return to the
call state, or put the receiver back and press the hands-free button to end the call.
8.4 Redial
 Redial the last outgoing number:
When the phone is in standby mode, press the redial button and the phone will call out the last outgoing
number.
 Call out any number with the redial key:
Enter the number, press the redial key, and the phone will call out the number on the dial.
 Press the redial key to enter the call record:
Log in the phone page, enter [Phone Settings] >> [Features] >> [Redial Settings], check Redial to
enter the call record page, press the redial button when standby to enter the call record page, and press
again to call out the current located number.
Picture 20 - Redial set
8.5 Dial-up Query
The phone is defaulted to turn on the dial-up inquiry function, dial-out, enter two or more numbers. The dial
interface will automatically match the call records, contacts in the number list. Use the navigation key and up
and down keys to select the number, press the call out key or wait for time out.