User's Manual
Table Of Contents
- Directory
- 1Picture
- 2Table
- 3Safety Instruction
- 4Overview
- 5Desktop Installation
- 6Appendix Table
- 7Introduction to the User
- 8Basic Function
- 9Advance Function
- 10Phone Settings
- 11Web Configurations
- 12Network >> Basic
- 12.1Network >> Service Port
- 12.2Network >> VPN
- 12.3Network >> Advanced
- 12.4Line >> SIP
- 12.5Line >> SIP Hotspot
- 12.6Line >> Dial Plan
- 12.7Line >> Basic Settings
- 12.8Line >> RTCP-XR
- 12.9Phone settings >> Features
- 12.10Phone settings >> Media Settings
- 12.11Phone settings >> MCAST
- 12.12Phone settings >> Action
- 12.13Phone settings >> Time/Date
- 12.14Phone settings >> Tone
- 12.15Phone settings >> Advanced
- 12.16Phonebook >> Contact
- 12.17Phonebook >> Cloud phonebook
- 12.18Phonebook >> Call List
- 12.19Phonebook >> Web Dial
- 12.20Phonebook >> Advanced
- 12.21Call Log
- 12.22Function Key >> Function Key
- 12.23Function Key >> Side Key
- 12.24Function Key >> Softkey
- 12.25Function Key >> Advanced
- 12.26Application >> Manage Recording
- 12.27Security >> Web Filter
- 12.28Security >> Trust Certificates
- 12.29Security >> Device Certificates
- 12.30Security >> Firewall
- 12.31Device Log >> Device Log
- 13Trouble Shooting
119
/
125
Picture 135 - Web Filter settings
Picture 136 - Web Filter Table
Adding and removing IP segments are accessible. Configure the starting IP address within the start IP, end
the IP address within the end IP, and click [Add] to submit to take effect. A large network segment can be set,
or it can be divided into several network segments to add. If the user wants to delete, select the initial IP of
the network segment to be deleted from the drop-down menu, and then click [Delete] to take effect.
Enable web page filtering: configure enable/disable web page access filtering; Click the "apply" button to take
effect.
Note: if the device you are accessing is in the same network segment as the phone, please do not configure
the filter segment of the web page to be outside your own network segment, otherwise you will not be able to
log in the web page.
12.28 Security >> Trust Certificates
Set whether to open license certificate and general name validation, select certificate module.
You can upload and delete uploaded certificates.