User's Manual

ManualsBrandsfantime ManualsAudio EquipmentBluetooth Earbuds

User Manual

Model : IP8-X

Part 1 Product Overview

IP8-X is a pair of Bluetooth-connected Earbuds with its own charging case, giving you the freedom to

take your music anywhere in an elegant design.

Part 2 Parameter Configuration

Bluetooth Version Bluetooth V5.0 Ultra-Low Power Consumption

Frequency Band 2.4GHz

Transmission Distance Positive distance

≤

20m, Back distance

≤

15m

Battery Capacity 30mAh (Earbuds) , 220mAh (Charging Case)

Talk Time / Music Playtime Up to 7 hours

Maximum Playtime with Charging Case Additional 63 hours

Dimensions 15.4 x 14.5 x 15.0 mm (Earbud)

Weight 4.2 grams (Earbud), 65 grams (Charging Case)

Summary of content (7 pages)

PAGE 1
User Manual Model : IP8-X Part 1 Product Overview IP8-X is a pair of Bluetooth-connected Earbuds with its own charging case, giving you the freedom to take your music anywhere in an elegant design. Part 2 Parameter Configuration Bluetooth Version Bluetooth V5.0 Ultra-Low Power Consumption Frequency Band 2.
PAGE 2
Multi-function Button is also called “MFB” Button. Part 3 User Guide 1. Choose Earmuffs 2. Wearing Earbuds 3. Charging 4. Power On/Off and Paring 5. Connect your device 6. Play Music 7. Calling 8. Change Language 9. Other Description 1. Choose Earmuffs According to the needs of wearing, choose the right and left earmuffs from the large, medium and small earmuffs. 2.
PAGE 3
. Charging Charging your charging case: When charging, the LED on the Charging Case will flash blue to indicate that the Charging Case is charging. It is fully charged when all 4LEDs on the Charging Case are lit. Note: You can charge your Carging Case with or without the Earbuds inserted. Charging your earbuds: (need to close the charging case.) 1) Place your Earbuds into the Carging Case and make sure they sit comfortably in the magnetic Charging Docks.
PAGE 4
5.3 Reconnect your device: 1) Delete the previously paired Bluetooth name "IP8-X" in your phone. 2) Then reconnect your phone (as explained in the chapter "Connecting the phone for the first time"). 5.4 Disconnect and reconnect: After the earbuds are disconnected from the phone: 1) Return to the effective position within 1 minute, it will automatically reconnect; 2) If you cannot return to the valid position after 1 minute, the earbuds will automatically turn off. 5.
PAGE 5
switched to the phone. 2-2) Press and hold the left and right earbuds multifunction button for 2-5 seconds at the same time, the earbuds are reconnected, and the talking is switched to the earbuds. When dialing: Click the multifunction button to cancel. Redial: Double-click the multifunction button to redial the last number in the call list. 8.
PAGE 6
Q3: When turning both Earbuds on, one (or both of the Earbuds) does not work. A3: Reset the Earbuds connection as explained in the chapter “5. Connect your device”. Q4: Why does the sound appear intermittent during a call? A4: 1. Please kindly try to turn off Bluetooth connection,delete "the Bluetooth device" in Bluetooth list and reconnect. 2. Near the signal tower, traffic lights and substations may result in signal cut in and cut off. 3.
PAGE 7
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.