August 2004 – AB0804 Accessories Book Fantech I Your Ventilation Solutions Company
Supply/Exhaust Fans Combination Exhaust Grill and Light Roof Cap VLC64 Vent light combination. Smallscale grill with 50 watt halogen light (MR16 bulb included). UL approved for wet locations. Kit includes prewired grill light assembly with back-draft damper, 50 watt halogen bulb, and 6 to 4inch reducer for connecting ductwork. Does not include fan. May also be used as a light only. Inline Fan VLC 64 50w Halogen Light 121/2 6† 4 50w Halogen / 3 8 Dimensional information in inches.
Supply/Exhaust Fans Adjustable Exhaust Grills PGDE PGE Plastic Grill includes integrated backdraft damper. A low profile, adjustable intake/exhaust circular grill. Included with the grill is a matching diameter galvanized mounting collar with nailing strip. Fantech’s Plastic Grill. A low profile, adjustable intake/ exhaust circular grill. Included with the grill is a matching diameter galvanized mounting collar with nailing strip.
Controls & Switches Pressure Switches Variable Speed Controllers DB 10 SCD Series Slide type variable speed controller with on/off switch. White Decora-style switch plate and screws included. Fits standard single gang box. Dryer boost switch. Automatic pressure switch allows for fully automatic operation of dryer booster fan. Fan runs for 10 minutes when positive pressure is sensed in the duct line then shuts off and turns on again as needed. Switch suitable for 115 volt supply. 2 amp rating.
Controls & Switches Timers Dehumidistat Controller FD 60EM FH 20 Wall mounted dehumidistat. Adjustable between 20% and 80% relative humidity. Switch suitable for up to 115 volt supply. 7.5 amp rating. White. Electronic push button timer. Select from 10, 20, 30 and 60 minute timed operation of fan. Includes Decora style white switch plate and screws. Fits standard single gang box. Ideal for multiple switching locations. Switch suitable for 115 volt supply. 20 amp rating.
Controls & Switches HRV/ERV Controls EDF5 Control multiple functions of your Fantech HRV/ERV with one slimline wall control.Two-wire connection simplifies installation. Use one EDF5 per HRV/ERV installed. DIGITAL DISPLAY Shows Indoor Humidity Level DEHUMIDISTAT CONTROL A Dehumidistat is ideal for use in energy efficient houses where indoor humidity (during the heating season) is higher than outdoor levels. High humidity is a major cause of structure damage and IAQ problems such as mold and mildew.
Duct Supplies Backdraft Dampers Iris Dampers IR RSK Iris dampers for quiet, precise balancing of ventilation systems. Dampers include calibrated airflow measuring devise. Backdraft dampers with galvanized steel collar and lightweight aluminum damper blades. Spring loaded for positive closure.
Duct Supplies Sheet Metal Adapters FY CKR “Y” adapter for circular duct. Constructed of galvanized sheet metal. Increaser or reducer for circular duct. Constructed of galvanized sheet metal. D A B B A D C C E Model UPC# A† B† C D CKR 54 CKR 64 CKR 86 65054 65064 65086 5 6 8 4 4 6 71/8 8 71/8 31/4 41/2 31/4 Dimensional information in inches. † Duct connections are 1/8” smaller than duct size.
Duct Supplies Round Flexible Duct FIDT Inlet Guards IG Flexible round insulated duct. Available in 25-foot lengths. UL listed. Wire ring inlet guards used to prevent foreign objects from entering duct line. Zinc chromate plated steel. Model UPC# ø Duct Model UPC# ø Duct FIDT 4 FIDT 5 FIDT 6 FIDT 8 FIDT 10 59040 59050 59060 59080 59100 4 5 6 8 10 IG 4 IG 5 IG 6 IG 8 IG 10 IG 12 75040 75050 75060 75080 75100 75120 4 5 6 8 10 12 Dimensional information in inches.
Exterior Vents Roof Caps Soffit Vent RC UEV 4 Roof Cap with damper flap closure, duct connection and screened exhaust opening. Plastic soffit vent for use with 4 or 6-inch duct. Note: Use FEA4 or FEA6 (shown on page 9) for installations where flex duct is used. Stainless steel or copper roof caps available by special order. Call for more information.
Range Hood Liners SHL/SGHL Kitchen Ventilation the quiet, efficient way. SHL Series range hood liners feature all stainless steel construction. SGHL liners feature stainless steel face with galvanized steel housing. Both styles have built-in infinite speed control for the fan, washable aluminum filters and dimmable halogen lights (purchase separately). SHL Series available in 36", 42" and 48" widths. SGHL Series available in 30" and 36" widths. UL approved.
Index Supply/Exhaust Grills HRV/ERV Controls Combination Exhaust Grill & Light VLC64 ............................................................ 2 Fixed Exhaust Grills DG 4 ................................................................ 2 DG 6 ................................................................ 2 DGD 4 ............................................................ 2 DGD 6 ............................................................ 2 Adjustable Exhaust Grills MGDE 4 ..........................
