Specifications Sheet

Specification Sheet
Item #: 427768
Rev Date: 2019-08-29
SER 200
Energy Recovery Ventilator
Product #: 99226
Fantech's, SER 200 is an Energy Recovery Ventilator designed for higher
static pressure applications. The unit brings a continuous supply of fresh
air into a home while exhausting an equal amount of contaminated air.
The energy recovery core at the center of the unit transfers heat and
moisture from incoming air to the outgoing air that was cooled and dried
by the building's air conditioner.
Features
• Fans with backward curved blade
• Electrostatic filters (washable)
• ERV transfers both heat and humidity
• Anti-microbial material
• Withstands freezing
• AHRI certified
• Removable screw terminal for easy connection
• Lighweight 51 lbs (23Kg)
• Multiple speed operation
Optional Controls
• ECO-Touch™
(#44929) – Programmable Touch Screen Wall Control
• EDF7
(#44883) – Electronic multi-function dehumidistat
• EDF1
(#40375) – Multi-function control
• RTS5
(#44794) – 20/40/60 minute over-ride
• RTS2
(#40164) – 20 minute over-ride
• MDEH1
(#40172) – Dehumidistat
Specifications
• Duct size – 6" (152 mm)
• Voltage/Phase – 120/1
• Power rated – 240 W
• Amp – 2.3 A
• Average airflow – 187 cfm (88 L/s)
@ 0.4" P
s
(100Pa)
Fans
Two (2) factory-balanced fans with backward curved blades. Motors come
with permanently lubricated, sealed ball-bearings to guarantee long life
and maintenance-free operation.
Energy Recovery Core
AHRI certified core made from water vapor transport durable polymer
membrane that is highly permeable to humidity. The ERV core is freeze
tolerant and water washable. Core dimensions are 12” x 12” (305 x 305
mm) with a 15” (381 mm) depth.
Defrost
A preset defrost sequence is activated at an outdoor air temperature of
14°F (-10°C) and lower. During the defrost sequence, the supply blower
shuts down & the exhaust blower switches into high speed to maximize
the effectiveness of the defrost strategy. The unit then returns to normal
operation, and continues cycle.
Serviceability
Core, filters, fans and drain pan can be easily accessed through latched
door. Core conveniently slides out on our new easy glide core guides. 22"
(559 mm) of clearance is recommended for removal of core.
Case
24 gauge galvanized pre-painted steel corrosion resistant.
Insulation
Cabinet is fully insulated with 1” (25 mm) high density expanded
polystyrene.
Filters
Two (2) washable electrostatic panel type air filters 11.75” (298mm) x
15” (380mm) x 0.125” (3mm).
Controls
External three (3) position (Low/Stand By/Medium) rocker switch that will
offer continuous ventilation. Fantech offers a variety of external controls.
(see controls)
Installation
Unit is typically hung by using installation kit supplied with unit. Mounting
bolts provided on top four (4) corners of unit. An optional wall bracket is
available.
Warranty
5 years on energy recovery core, 7 year on motors, and 5 year on parts.