Submittal Sheet

Specification Sheet
Item #: 427502
Rev Date: 2017-08-17
SER 150
Heat Recovery Ventilator
Product #: 99209
Fantech's, SER 150 is an Energy Recovery Ventilator designed for higher
static pressure applications. The unit brings a continuous supply of fresh
air into a home while exhausting an equal amount of contaminated air.
The energy recovery core at the center of the unit transfers heat and
moisture from incoming air to the outgoing air that was cooled and dried
by the building's air conditioner.
Features
• Compact design
• Fans with backward curved blade
• Electrostatic filters (washable)
• ERV transfers both heat and humidity
• Anti-microbial material
• Withstands freezing
• AHRI certified
• Removable screw terminal for easy connection
• Lighweight 46 lbs (20Kg)
• Multiple speed operation
Optional Controls
• ECO-Touch™
(#44929) – Programmable Touch Screen Wall Control
• EDF7
(#44883) – Electronic multi-function dehumidistat
• EDF1
(#40375) – Multi-function control
• RTS5
(#44794) – 20/40/60 minute over-ride
• RTS2
(#40164) – 20 minute over-ride
• MDEH1
(#40172) – Dehumidistat
Specifications
• Duct size – 6" (152 mm)
• Voltage/Phase – 120/1
• Power rated – 171 W
• Amp – 1.4 A
• Average airflow – 145 cfm (68 L/s)
@ 0.4" P
s
(100Pa)
Fans
Two (2) factory-balanced fans with backward curved blades. Motors come
with permanently lubricated, sealed ball-bearings to guarantee long life
and maintenance-free operation.
Energy Recovery Core
AHRI certified core made from water vapor transport durable polymer
membrane that is highly permeable to humidity. The ERV core is freeze
tolerant and water washable. Core dimensions are 9” x 9” (229 x 229
mm) with a 15” (381 mm) depth.
Defrost
A preset defrost sequence is activated at an outdoor air temperature of
14°F (-10°C) and lower. During the defrost sequence, the supply blower
shuts down & the exhaust blower switches into high speed to maximize
the effectiveness of the defrost strategy. The unit then returns to normal
operation, and continues cycle.
Serviceability
Core, filters, fans and drain pan can be easily accessed through latched
door. Core conveniently slides out on our new easy glide core guides. 17"
(432 mm) of clearance is recommended for removal of core.
Case
24 gauge galvanized steel. Baked powder coated paint.
Insulation
Cabinet is fully insulated with 1” (25 mm) high density expanded
polystyrene.
Filters
Two (2) washable electrostatic panel type air filters 8.5” (216mm) x 15”
(380mm) x 0.125” (3mm).
Controls
External three (3) position (Low/Stand By/Medium) rocker switch that will
offer continuous ventilation. Fantech offers a variety of external controls.
(see controls)
Installation
Unit is typically hung by using installation kit supplied with unit. Mounting
bolts provided on top four (4) corners of unit. An optional wall bracket is
available.
Warranty
Limited lifetime on aluminum core, 7 year on motors, and 5 year on
parts.