Install Instructions

18
ERV core washing instructions
For proper maintenance of your energy recovery core please follow these instructions
5
6
3
4
1 Remove both lters by sliding them out.
2 Remove the core from the unit.
3 With one of your core's air inlets facing
down, place it in a large sink, bathtub, or
shower.
4 Pour clean tap water through the face of the
core facing upwards until it runs clear.
Ensure the entire surface is rinsed.
5 Rotate the core so that its other air inlet is
facing down and repeat step 5.
6 With plates still oriented vertically allow the
core to dry, normally 2-3 hours.
7 Slide back the core into the unit
8 Replace both lters.
1 2
7
8