Submittal Sheet

SE704N
Compact ERV with easy mount wall bracket. Brings a contin-
uous supply of fresh air into a home while exhausting an
equal amount of contaminated air. The enthalpic core at the
center of the unit transfers heat and moisture from the
incoming air to the outgoing air. The air brought into the liv-
ing area is cooled and the humidity is reduced for maximum
comfort. Reduces the load on a home’s air conditioner to
save on cooling costs.
FEATURES
• Super Compact Size
• Includes Easy-Mount Wall Bracket
• Enthalpy Core
• 4˝ (100mm) Duct Connection
• No Balancing Required
• Unit Can Be Installed In Any Position
• No Defrost or Drain Pan Needed
• Easy Access Service Door
• 3’ (914mm) Plug-in Power Cord
• Only 25 lbs (11 kg)
• Electrostatic Filters (washable)
• Easy Core Guide Channels For Removing Core
• Single Speed Ventilation
ACCESSORIES
• FDT 7 – 7 Day Digital Programmable Timer
• COM 4P – 4˝ Weather Hoods
(1 supply & 1 exhaust)
• FEL 4 – 4˝ 90˚ Elbow
• CG 4 – 4˝ Adjustable Grille
SPECIFICATIONS
CASE 24 gauge galvanized steel. Baked powder coated paint,
antique white. Cabinet fully insulated with 1" (25 mm)
aluminum foil-face high density polystyrene foam to prevent
condensation and meet the requirements of the UL 94HF.
MOTORS Two (2) German-manufactured, factory-balanced
ebm™ motors with backward curved blades. Motors come
with permanently lubricated sealed ball bearings to
guarantee long life and maintenance-free operation. Seven
(7) year warranty
. Steep fan curve requires no balancing.
CORE Enthalpy core configured for efficient cross-flow
ventilation. Core is 8.5˝ x 8.5˝ (216 x 216 mm) with a 8˝
(205 mm) depth. Cores are manufactured to withstand
large temperature variations.
FILTERS Two (2) W
ashable Electrostatic Panel Type Air Filters,
8.5˝ (216mm) x 8˝ (203mm) x 0.125˝ (3mm).
CONTROLS Unit is designed to operate continuously on a
single speed. See FDT 7 under accessories or contact Tech
Support for possible intermittent, line-voltage options.
SERVICEABILITY Core, filters, and motors can be easily
accessed through latched door
. Core conveniently slides out
on our new easy glide core guides. 10˝ (250mm) of
clearance is recommended for removal of core.
DUCT CONNECTION 4˝ (100mm) steel duct connections with
rubber gasket for easy sealing.
WARRANTY Limited 5 year on Enthalpy core, 7 year on
motors, and 5 year on parts.
Energy Recovery Ventilator
S = Side discharge
E = Energy recovery
704 = 70cfm, 4 port design
N = No defrost & drain pan
Distributed by:
Fantech, reserves the right to modify, at any time and without notice, any or all of its products’ features,
designs, components and specifications to maintain their technological leadership position.