August 2008 Fantech, Inc. and Fantech Limited certifies that the RE(C) Series shown herein is licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of the AMCA Certified Ratings Program.
RE(C) SERIES POWER ROOF VENTILATORS Features Description A low silhouette, direct drive centrifugal type exhaust fan for moderate size ventilation applications. RE(C) Series fans are designed to meet present demands of efficiency and reduced energy consumption. Fan motors are capable of operating in air stream temperatures of 140ºF. Motor bearings are a permanently sealed, self lubricating ball type.
RE(C) 54 Side View 1.2 Unit Specifications: 1/2" Housing Metal Thickness 22 gauge 6" Base Metal Thickness 18 gauge h" 5" 15 1/2" Approximate Weight - 8 lbs. Nominal Hp 0.02 Hp Tip Speed (fpm) = RPM x 1.37 All dimensions in inches. "h" dimension is 11/2" on model REC only. Ships with 5" to 4" reducer. 1 Static Pressure (in. WG) 9 0.8 0.6 0.4 0.2 0 0 15 30 45 60 75 90 105 120 Flow Rate (CFM) Air Performance Data Volts 115 Nom. RPM 3040 Max. Watts 19 Max. Amps 0.18 0.
RE(C) 6 Side View 6 1/2" Base Metal Thickness 18 gauge h" 6" Approximate Weight - 15 lbs. Nominal Hp 0.06 Hp 1/2" Tip Speed (fpm) = RPM x 1.958 All dimensions in inches. "h" dimension is 11/2" on model REC only 1.75 1.5 Static Pressure (in. WG) Housing Metal Thickness 22 gauge 15 2 Unit Specifications: 13" 1.25 1 0.75 0.5 0.25 0 0 25 50 75 100 125 150 175 200 225 250 Flow Rate (CFM) Air Performance Data Volts 115 Nom. RPM 2700 Max. Watts 87 Max. Amps 0.80 0.0" 227 .
RE(C) 8XL Side View 15 2.5 Unit Specifications: 3/4" Housing Metal Thickness - 22 gauge h" Base Metal Thickness - 18 gauge Approximate Weight - 20 lbs. Nominal Hp 0.10 Hp 8" 20" Tip Speed (fpm) = RPM x 2.268 All dimensions in inches. "h" dimension is 11/2" on model REC only Static Pressure (in. WG) 6" 2 1.5 1 0.5 0 0 50 100 150 200 250 300 350 400 450 Flow Rate (CFM) Air Performance Data Volts 115 Nom. RPM 2800 Max. Watts 153 Max. Amps 1.40 0.0" 409 .125" 382 .
RE(C) 10XL Side View 4 Unit Specifications: 3/4" 11 3/4" Housing Metal Thickness 22 gauge Base Metal Thickness 18 gauge h" 10" 20" Approximate Weight - 30 lbs. Nominal Hp 0.30 Hp All dimensions in inches. "h" dimension is 11/2" on model REC only 3.5 Static Pressure (in. WG) 19 3 2.5 2 1.5 1 0.5 Tip Speed (fpm) = RPM x 2.577 0 0 100 200 300 400 500 600 700 800 2.50" 383 3.00" 287 3.50" 170 Flow Rate (CFM) Air Performance Data Volts 115 Nom. RPM 3250 Max. Watts 394 Max. Amps 3.
RE(C) 10XLT Side View Unit Specifications: 12 1/2" 3.5 3 Housing Metal Thickness 22 gauge Static Pressure (in. WG) 20" Base Metal Thickness 18 gauge h" 10" 20" Approximate Weight - 30 lbs. Nominal Hp 0.40 Hp All dimensions in inches. "h" dimension is 11/2" on model REC only 2.5 2 1.5 1 0.5 Tip Speed (fpm) = RPM x 2.783 0 0 100 200 300 400 500 600 700 800 900 1000 1100 Flow Rate (CFM) Air Performance Data Volts 115 Nom. RPM 2950 Max. Watts 531 Max. Amps 4.86 0.0" 1008 .
Five (5) Year Warranty This warranty supersedes all prior warranties DURING ENTIRE WARRANTY PERIOD: FANTECH will repair or replace any part which has a factory defect in workmanship or material. Product may need to be returned to the Fantech factory, together with a copy of the bill of sale and identified with RMA number. FOR FACTORY RETURN YOU MUST: • Have a Return Materials Authorization (RMA) number. This may be obtained by calling FANTECH either in the USA at 1.800.747.1762 or in CANADA at 1.800.565.
