User Guide

5
fantech
Wiring
Factory Motor Wiring
(For reference only)
Terminal Marking
Field Wiring to be Completed by Installer
Color Function
blue L Power supply 120VAC, 50/60 Hz
black N Neutral conductor
green/yellow PE
Protective conductor
Models prioAir 6 and prioAir 8
Models prioAir 6-EC and prioAir 8-EC
Factory Motor Wiring
(For reference only)
Terminal
Marking
Field Wiring to be Completed by Installer
Color Function
Brown L Power supply 120VAC, 50/60 Hz
Blue N Neutral Conductor
Green/Yellow PE Protective Conductor
Red +10V Voltage Output 10V/1.1mA, Electrically Isolated
Yellow 10V/PWM Controller Input 0….10V or PWM, Electrically
Isolated
Blue GND GND- Connection to the Controller Interface
White Tacho
Speed Output: Open Collector, 1 Impulse per
revolution, electrically isolated Isink_max=10mA
Motor side
Control Options (for prioAir 6EC and PrioAir 8EC models)
Maximum Speed
Place Jumper Between
Terminals 6 and 7
Adjustable Speed
10V | n = max
1V | n = min
< 1V | n = 0
Adjustable Speed Through
PWM 1… 10kHz
100% PWM | n = max
10% PWM | n = max
<10% PWM | n=0
Potentiometer
Speed Controlled