Instructions / Assembly

ManualsBrandsFantech ManualsAppliance VentsHP Slimline 159 CFM Radon Fan

Installation and Operation Manual

Item #: 484807

Rev Date: 2016-10-20

United States

10048 Industrial Blvd., Lenexa, KS, 66215

Tel.: 800.747.1762 • Fax: 800.487.9915

Canada

50 Kanalflakt Way, Bouctouche, NB, E4S 3M5

Tel.: 800.565.3548 • Fax: 877.747.8116

HP 190SLQ

Slimline Radon Fan

Summary of content (8 pages)

PAGE 1
Item #: 484807 Rev Date: 2016-10-20 Installation and Operation Manual HP 190SLQ Slimline Radon Fan United States 10048 Industrial Blvd., Lenexa, KS, 66215 Tel.: 800.747.1762 • Fax: 800.487.9915 Canada 50 Kanalflakt Way, Bouctouche, NB, E4S 3M5 Tel.: 800.565.3548 • Fax: 877.747.
PAGE 2
Note Warning / Important note Information Technical information Practical tip WARNINGS DO NOT CONNECT POWER SUPPLY until fan is completely installed. Make sure electrical service to the fan is in the locked “OFF” position. 1. This unit has rotating parts and safety precautions should be exercised during installation, operation and maintenance. 2. WARNING! TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS - OBSERVE THE FOLLOWING: a.
PAGE 3
INSTALLATION The HP 190SLQ is designed for use with 4" schedule 20 or schedule 40 PVC pipe. Prior to installation, the suction pipe should be terminated at the exterior wall. The suction pipe should be installed with a slight incline to drain water away from the fan. The HP 190SLQ has an integrated condensate bypass. A secondary condensate bypass is not required. 1. Loosely place a Hose Clamp (item 1 provided) over Rubber Sleeve (item 2 provided). 2.
PAGE 4
INSTALLING THE HP 190SLQ (Cont.) 3. Insert a Flexible Coupling (item 4 provided) over HP 190SLQ discharge and securely tighten fan side Hose Clamp. 5. Securely mount the Metal Bracket (item 5 provided) as shown using a screw (not provided) located at the mark made previously. 4. Measure 17” up and 1 3/8” to the right from center of Suction Pipe (item 6 not provided). Mark this location. 6. Use a Hose Clamp provided with the Flexible Coupling and insert it in the Metal Bracket (item 5) slot.
PAGE 5
INSTALLING THE HP 190SLQ (Cont.) 7. Insert the HP 190SLQ with Rubber Sleeve in the suction pipe as far as it can penetrate. 9. Insert the Discharge Pipe (item 7 not provided) into the Flexible Coupling and tighten the Hose Clamp. 8. Wrap the Metal Bracket Hose Clamp around Flexible Coupling, but do not tighten it.
PAGE 6
WIRING DIAGRAM Capacitor Brown 120V AC Line IN (Black) Black Neutral (White) Blue Order of wires on the terminal block may not be as shown. DIMENSIONS D C B fantech E A A B C D E 14 15/16 15 7/8 13 7/8 5 1/2 6 1/8 All dimensions in inches.
PAGE 7
WARRANTY Five (5) Year Warranty This warranty supersedes all prior warranties DURING ENTIRE WARRANTY PERIOD: Fantech will repair or replace any part which has a factory defect in workmanship or material. Product may need to be returned to the Fantech factory, together with a copy of the bill of sale and identified with RMA number. FOR FACTORY RETURN YOU MUST: • Have a Return Materials Authorization (RMA) number. This may be obtained by calling Fantech either in the USA at 1.800.747.
PAGE 8
Fantech reserves the right to make technical changes. For updated documentation please refer to www.fantech.