User Guide

Installation Manual
FTD7
7-Day Tiimer
This timer incorporates a LCD (liquid crystal display) which accurately displays the time of
day in an AM/PM format. There are 8 possible “on/off” combinations that can be
programmed. For security purposes, the timer has an additional feature that allows for
a random variation of 2 to 32 minutes for each “on” and “off” time from the actual time
programmed. Adjusting for Daylight Savings Time can be done quickly and easily.
USA 1.800.747.1762 • Canada 1.800.565.3548
Fantech reserves the right to make technical changes.
For updated documentation please refer to www.fantech.net
Rev Date: 2018-02-05
Time Settings
The correct time of day and day of week must be set in AM/PM format prior to using the
timer for the first time.
• Press “CLOCK” and “HOUR” to set the hour of the day
• Press “CLOCK” and “MIN” to set minutes
• Press “CLOCK” and “WEEK” to set the day of the week
Program Settings
There are 8 possible program combinations available.
• Press “PROG” to enter program mode. The display will show a “1” and “ON” in the
left side of display
• Press “HOUR”, “MIN”, and “WEEK” to program the correct day and time the timer
should turn on
• Press “PROG” to set the timer for “OFF” time and day for “1”
• Press “HOUR”, “MIN”, and “WEEK” to program the correct day and time the timer
should turn off
• If needed, press “PROG” to advance to the second (2) on/off setting
• If needed, pressing “R” will cancel the current setting, pressing “R” a second time will
undo the change
The programming of the timer is maintained during power failures by an internal battery.
When the timer is first installed, it is recommended that the battery be given an opportunity
to charge for a few hours before attempting to program the timer.
Combination Weekly Settings
While in the “Program Setting” mode above, various combinations of week days may be
programmed into the timer.
• Press “WEEK” the display will show: “Mo, Tu, We, Th, Fr, Sa, Su”. This setting will
activate the timer for all 7 days